LAP-TEQ PLUS ATMOSPHERE
The LAP-TEQ PLUS ATMOSPHERE (temperature, humidity and air pressure sensor) is used to monitor atmospheric data. It consists of one component, the sensor module. The sensor module can be easily looped into the cable path between the LAP-TEQ PLUS DISPLAY and other LAP-TEQ sensors due to its compact design.
In 2009, the first generation of the LAP-TEQ angle measurement system with red laser was introduced and distributed by TEQSAS worldwide to well-known loudspeaker manufacturers in the professional sector.
Since 2018, the current 2nd generation of the LAP-TEQ, the LAP-TEQ PLUS INCLINOMETER is now on the market. With a green laser in cross optics, improved display, improvement of measurement accuracy, pressure compensation valve and many other changes, the new LAP-TEQ PLUS has established itself as the market leader.
As a consistent further development of the LAP-TEQ family, we introduced the LAP-TEQ PLUS ATMOSPHERE in 2017. The LAP-TEQ PLUS ATMOSPHERE is a temperature, humidity and air pressure sensor and is used to monitor atmospheric data.
What does the LAP-TEQ PLUS ATMOSPHERE sensor unit actually do?
The LAP-TEQ PLUS ATMOSPHERE is a sensor to monitor atmospheric data around an event.
A classic thermometer can therefore be dispensed with immediately.
By means of exact atmospheric data it is possible to control the behavior of high frequencies or also of delay times during an event and if necessary to adapt to the current atmospheric values.
The sensor can be located up to 75 meters away from the next reading unit. It can also be looped into existing cable paths between a LAP-TEQ PLUS DISPLAY or LAP-TEQ PLUS INTERFACE and another LAP-TEQ sensor.
At the respective reading unit, you can select which sensor you want to read exactly.
This allows free positioning within a venue.
What does LAP-TEQ PORT Compatible mean?
The LAP-TEQ ELEVATION sensor is compatible with LAP-TEQ PORT technology, it is therefore "LAP-TEQ PORT Compatible". This means it can be operated on any device with an available LAP-TEQ PORT.
Can the LAP-TEQ PLUS ATMOSPHERE also operate other LAP-TEQ sensors?
The LAP-TEQ PLUS ATMOSPHERE has a port for other LAP-TEQ sensors. It therefore has an available LAP-TEQ PORT for connecting a LAP-TEQ PLUS INCLINOMETER, for example.What does LAP-TEQ PORT Compatible mean?
Can the LAP-TEQ PLUS ATMOSPHERE, the LAP-TEQ PLUS INCLINOMETER and the LAP-TEQ PLUS ELEVATION be operated in parallel on one LAP-TEQ PLUS DISPLAY?
Since the LAP-TEQ PLUS ATMOSPHERE and the LAP-TEQ PLUS ELEVATION have an available LAP-TEQ PORT, the LAP-TEQ PLUS INCLINOMETER, for example, can be operated on the LAP-TEQ PLUS ELEVATION without further ado. These two sensors can in turn be operated on the LAP-TEQ PLUS ATMOSPHERE without further ado.
In this case, the measured values for altitude and angle are displayed simultaneously on the corresponding reading product (e.g. LAP-TEQ PLUS DISPLAY).
On the LAP-TEQ PLUS DISPLAY, the values of the LAP-TEQ PLUS ATMOSPHERE can then optionally also be displayed.
Permitted ambient temperature for use
Permitted ambient temperature for storage
-20 - 50°C
102 x 25 x 31 mm